18
Instructions
The e-bike's control panel, located on the left side of the handlebar, lets you turn
on the bike for electric power, select riding modes and check the battery status.
Fig. 18
Battery
status
Pedal assis-
tance level
PLUS / increase
MINUS / decrease
POWER
Bluetooth
indicator
USB indicator
6km/h EV mode
indicator
USB port
Battery status
Shows the battery status from full to empty.
The last LED will flash when the battery needs to be charged.
Pedal assistance level
Shows the pedal assistance level from 1 to 5.
1 (low) ..................1 LED light .............. up to 10km/h
2 (medium low) ....2 LED lights ............. up to 13km/h
3 (medium) ..........3 LED lights ............. up to 17km/h
4 (medium high) ..3 LED lights ............. up to 21km/h
5 (high) .................5 LED lights ............. up to 25km/h
BT indicator
Shows that a device is connected wirelessly via
Bluetooth
technology when
using the
Zippo Cycling
app. When no device is connected, it will flash slowly.
USB charging indicator
Shows when the USB port is used for charging.
CAUTION:
When this LED flashes while a device is connected for charging,
disconnect the device immediately to avoid overloading, otherwise you may risk
damaging the display or USB device.
NOTE:
Please also refer to the relevant information on the opposite page.
6km/h EV mode
Shows when 6km/h EV mode is in use.
18
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: ESTC27M PRODUCT CODE: 704459 04/2021
