EST LSRA, Installation, Operation & Maintenance Manual

Page: 61 / 92

Programming
Location
An identification label for the selected display. The location may be up
to 20 characters in length.
Network Baud Rate (FCC Only)
The parameter which sets the Life Safety Remote Annunciator
Network the data transfer rate. Valid entries are: 2400, 4800,
{ 9600 } ,
19200.
Network Comm Class (FCC Only)
The parameter which defines the wiring configuration between the
Individual Life Safety Remote Annunciators, and also with the host
system
. Do not confuse this with the network data line wiring
configuration.
No Switch Panel
Used to configure an LSRA, which has no front panel key switches.
Number of Addresses (Q) (IRC-3 only)
The number of consecutive addresses used by the panel, starting at the
base panel address. Valid entries are 1 to 4. Each address is the
equivalent of 88 messages.
Number of Displays (FCC only)
The parameter which sets the quantity of LSRA panels installed on the
Life Safety Remote Annunciator Network. Valid entries are 1 to 32.
Panel (IRC-3 and FCC)
The IRC-3 or FCC network panel address.
PC Communications Port
The parameter which selects PC serial port #1 or serial port #2 for
downloading from the PC to the Life Safety Remote Annunciator
Network LSRAs. Match this parameter to the serial port where the
download cable is connected. Valid entries are
{ 1 } or 2.
Print
A command to send LSRA(-C) configuration information to the
printer. A sample report follows. When printed as a file, the report
filename is
MESSAGE.TXT. This file should be renamed if a copy is
required for archive purposes, as MESSAGE.TXT is regenerated every
time a print request is made.
Print Hard Copy (or File)
A command to print a hard copy (or generate a file ) of the "selected
display" configuration and its messages. Details of the printed report
may be found elsewhere in this document. The description of the
LSRA
Installation, Operation, Maintenance, and Configuration Manual 4.25
firealarmresources.com