EST LSRA Installation, Operation & Maintenance Manual Download Page 54 | Manualshive

Page: 54 / 92

background image

Programming

Active When Key Switch Enabled

Active When Key Switch Disabled

No Switch Panel

Printer

Printer Baud Rate

Routing

3 When all required parameters have been entered in the "Parameter

Entry for Selected Display" screen, press TAB to save the previous
entries and proceed to the "Message Entry/Editing for Selected
Display" screen, shown below. To return to the previous "Parameter
Entry for Selected Display" screen, press ESC.

WED FEB 6, 1994 11:16:35 Remote Alpha-Numeric Display Network

MESSAGE ENTRY/EDITING for SELECTED DISPLAY

Current Project File: Selected Display: LSS
Project Name: Printer:
Selected Label: Baud Rate:
Annunciation Type(s):
Active When Enabled: Current Msg:
Active When Disabled: Total Msgs:

_____________ _____________
Zone: [_____________] [_____________]

INSTRUCTIONS
Press UP or DN ARROW Keys until the desired zone value appears above.
Choices 1 to 52.

Press LF ARROW to enter message text
Press ENTER key to accept zone value shown, then message entry.
Press ESC to exit from zone select-message entry operation.

LSS4 Message Entry/Edit Screen

Note:

All information displayed on this screen applies to the LSRA

whose address is displayed in the Selected Display window.

4 The “Message Entry for Selected Display” screen is the second of

the two screens used to configure each LSRA and enter its
messages (phase 3).

5 Enter the required annunciator message parameters listed below.

Zone

40 Character message

Note:

The two message windows represent the two 20-character

segments of the 40-character message. The text in the left message
window appears in the LSRA display above the text in the right
message window.

Move the cursor to the zone window by pressing ENTER, if required.
Use the UP and DOWN keys to change the zone number, or manually
enter a number from the keyboard. When correct, press ENTER to
accept a single digit entry. Entering the second digit of a two-digit
number automatically moves the cursor to the message entry window.
Type in the zone message. The cursor will automatically jump from the
first message segment window (top line on the display) to the second

4.18

LSRA

Installation, Operation, Maintenance, and Configuration Manual

firealarmresources.com

«
...
52
53
54
55
56
...
»

Summary of Contents for LSRA





























































































Reviews:

No comments

Related manuals for LSRA

Brand: HST Pages: 2

Brand: E2S Pages: 3

Brand: The Fire Beam Pages: 16

Brand: LST Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands