EST LSRA Installation, Operation & Maintenance Manual Download Page 44 | Manualshive

Page: 44 / 92

background image

Programming

IRC-3(FCC/PCPU) and FCC/DCPU Phase 1 - Parameter
Entry for Entire Project

The “Parameter Entry for Entire Project” screen is divided into three
sections: the Network Status Window (top), the Menu Window
(middle), and the Instructions Window (bottom), as shown in the IRC-
3 and FCC menus below.

WED FEB 6, 1994 11:16:35 Remote Alpha-Numeric Display Network

PARAMETER ENTRY for ENTIRE PROJECT

PROJECT NAME: Select Base Address: 5
Project Description:
Q(nBR) of Addresses: 1 PC Communications Port: 1
Geographic Category: USA
Type: IRC3 Communications Baud Rate: 9600

S Select base address to start a block of 1-4 addresses
Q Select Number of Addresses P Select PC Communications Port
G Select Geographic Category B Select Communications Baud Rate

V Show Version

INSTRUCTIONS

Press any highlighted letter to alter the corresponding item.

Press TAB to move to the next screen and enter data to the
Selected Display shown above. The data here will be saved.

Press ESC to exit this program.

IRC-3 Project Menu

Current time and date information is displayed above the network
status window. The Network Status Window shows the current settings
of the network parameters. To move the cursor to a network parameter,
type the letter highlighted in that parameter name.

WED FEB 6, 1994 11:16:35 Remote Alpha-Numeric Display
Network

PARAMETER ENTRY for ENTIRE PROJECT

Project Name: Select Display: 1   Xfer:1
Project Description: Fault Action: 8999
Number of Displays: 1   PC Communications Port: 1
Geographic Category: USA Network Comm Class: B
Type: FCC Class B Network Baud Rate: 9600

S Select a display to edit (between 1 and Number of Displays)
D Select Number of Displays X XFER data from this display
G Select Geographic Category A Select Fault Action
P Select PC Communications Port
C Select Network Comm Class
V Show Version B Select Network Baud Rate

INSTRUCTIONS

Press any highlighted letter to alter the corresponding item.

Press TAB to move to the next screen and enter data to the
Selected Display shown above.

The data here will be saved.

Press ESC to exit this program.

FCC/DCPU Project Menu

4.8

LSRA

Installation, Operation, Maintenance, and Configuration Manual

firealarmresources.com

«
...
42
43
44
45
46
...
»

Summary of Contents for LSRA





























































































Reviews:

No comments

Related manuals for LSRA

Brand: FireAngel Pages: 25

Brand: Teknim Pages: 4

Brand: White Rodgers Pages: 4

Brand: The Fire Beam Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands