EST LSRA, Installation, Operation & Maintenance Manual

Page: 52 / 92

Programming
WED FEB 6, 1994 11:16:35 Remote Alpha-Numeric Display Network
PARAMETER ENTRY for ENTIRE PROJECT
Project Name: Selected Display ID: 1
Project Description:
Max Nbr of Displays: 4 PC Communications Port: 1
Geographic Category: USA
Type: LSS
S Select a display to edit (between 1 and 4)
G Select Geographic Category
P Select PC Communications Port:
V Show Version
INSTRUCTIONS
Press any highlighted letter to alter the corresponding item.
Press TAB to move to the next screen and enter data to the
Selected Display above. The data here will be saved.
Press ESC to exit this program.
LSS4 Status Window
The Menu Window lists the commands available from the “Parameter
Entry for Entire Project” screen. The Instruction Window provides
brief, context sensitive instructions for each operation.
There are up to 3 network parameters on the "Parameter Entry for
Entire Project" screen which must be filled out. Move the cursor to the
desired parameter window by pressing the key matching the
bold letter
in the parameter title. For example, to move the cursor to the
“
G eographic Category” window, press G.
Enter the required annunciator information for the parameters listed
below:
• G eographic Category: Select from USA, Canada, or Europe by
keying in the bold letter or using the UP and DOWN arrow keys
until the desired selection appears in the window, then press the
ENTER key to enter the selection. Use the ESC key to return to the
prior geographic category selection, if required.
• S elected Display (start with 01): Press S. Press the UP and DOWN
arrow keys, or key the number directly, until the desired display
number appears in the window.
Note:
RSA4-CPUs may be connected in a single line configuration
with LSRA(-C)’s on the LSS4 RS-485E circuit as long as there are no
more than four life safety remote annunciators on the circuit, and the
annunciator sub-addresses do not conflict. The following table shows
the equivalent sub-address settings for the RSA4-CPU and LSRA(-C)
modules. Additional RSA4-CPU can be found in the LSS4 manual.
Table Chapter 4-2: LSS4 RSA4-CPU / LSRA Sub-Address
Equivalents
1
ST
Sub-
Address
2
ND
Sub-
Address
3
RD
Sub-
Address
4
TH
Sub-
Address
RSA4-CPU 0 1 2 3
LSRA 1 2 3 4
4.16
LSRA
Installation, Operation, Maintenance, and Configuration Manual
firealarmresources.com