EST LSRA Installation, Operation & Maintenance Manual Download Page 32 | Manualshive

Page: 32 / 92

background image

Installation

Annunciator Configuration

IRC-3 and FCC/PCPU RS-485 Data Line

Switch Setup

All Dip switches should be set in the

OFF

position. S1-4 clears the

database and loads the default parameters.

Program Requirements

A special configuration program (CMDNPGM.EXE) supplied on the
LSS4 Configuration, IRC-3 Data Entry, and FCC Compiler disks is
used to configure the annunciators and to download program data into
the LSRA(-C)’s EEPROM memory. Each annunciator must be
configured and have its configuration downloaded into its memory
before it will operate. There is no default configuration installed
information in the annunciator as shipped from the factory.

Project name and location information is entered to uniquely identify
each individual project.

Each annunciator connected to an IRC-3 or FCC/PCPU data line must
have its base network panel address for the first 88 messages and up to
three additional addresses entered. Annunciator location information
should also be entered.

Each annunciator connected to an FCC/DCPU printer port must have
its “display ID” and annunciator location information entered.

The operation of the front panel switches on the LSRA must be
configured in conjunction with the front panel Enable/Disable
password.

All annunciators must have the type and text content of messages to be
displayed configured and downloaded into the annunciator’s memory.
Message routing and printer configuration information must also be
configured for each annunciator, as well as its “Geographic Category.”
Worksheets are provided at the end of this document to facilitate the
design and configuration of the annunciators.

Annunciator Setup - LSS4 Configuration

Switch Setup

All Dip switches should be set in the

OFF

position. S1-4 clears the

database and loads the default parameters.

Program Requirements

A special configuration program (CMDNPGM.EXE) supplied on the
LSS4 Configuration, IRC-3 Data Entry, and FCC Compiler disks is
used to configure the annunciators and to download program data into
the LSRA-C's EEPROM memory. Each annunciator must be

3.14

LSRA

Installation, Operation, Maintenance, and Configuration Manual

firealarmresources.com

«
...
30
31
32
33
34
...
»

Summary of Contents for LSRA





























































































Reviews:

No comments

Related manuals for LSRA

Brand: Simplex Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands