EST LSRA, Installation, Operation & Maintenance Manual

Page: 57 / 92

Programming
-C = Convert an IRC-3.N file to FCC format
-D = DCPU Display Pattern
-E = Error Checking Disabled
-L = Line Number
-M = Menu
-P = Communications Port
-R = Report Generation
-S = Source File Name
-T = Target File Name
-X = Download Target Node
-Z = Convert an IRC-3.N file to LSRA format
EXAMPLE:
To convert an IRC-3 data entry file to FCC format, at the
C:\LSRA
prompt type:
CONVERT [- C -S [ source ] - T [ target ] -D [A-Z] -L [ 00-07 ]
Where
[source]
is the name of the source file (including the
extension),
[target]
is the name of the target file (including the
extension),
[D](display)
is either A to Z, and
[L]
(line) is the
data line number.
To download a database using the CONVERT.EXE program, type the
following at the
C:\CMDN
prompt:
CONVERT -X [ node ] -S [ source ] -P [ port ]
Where
[node]
is the download target node,
[source]
is the name
of the source file (including the extension), and
[port]
is the
communications port via which the download will be accomplished.
Press ESC to exit.
Downloading to the LSRA
When all LSRAs have been configured, the information must be
individually downloaded into each LSRA's memory.
1. Remove power from the LSRA to be programmed.
2. Connect the LSRA to the PC.
3. Apply power to the LSRA to be programmed. The display should
show the following screen for up to 15 seconds.
JAN 01 01:01:01 M000
START UP:
DATABASE INTEGRITY
TEST... PLEASE WAIT
LSRA
Installation, Operation, Maintenance, and Configuration Manual 4.21
firealarmresources.com