Essilor PRO-E 600, User Manual

Page: 61 / 112

7. Reminder of size reduction/increase applied to lens diameter
8. Navigation
◦ Stop the cycle
◦ Return to the main edging screen without saving your changes
◦ Starting the cycle
c. Customized drilling
Call up the desired shape located on the tracer or on the job management program.
The shape is displayed on the edger work screen.
After the tracing of a shape with drilling settings:
• The drilling function is selected by default.
• The automatic mode is selected by default.
Select lens material.
Change the edging mode. Press to select customized mode .
Select the type of cycle.
Choose whether or not to polish and/or chamfer your lens.
For more information, consult the section Edging a lens > Perform a polishing
(
F
p.65)
and Edging a
lens > Perform a chamfering
(
F
p.66)
.
Press the “cycle start” button (front face) or .
The feeling cycle starts.
The customized drilling screen is displayed.
Select the type of drilling you want to do.
If necessary, select the drilling point(s) you want to modify.
If necessary, modify the diameter and/or angle of the selected drilling point.
>
>
>
>
1
2
3
4
5
6
7
8
9
Pro-E 600 > v1 -02.17
64
U
SER
M
ANUAL
> II. E
DGING A LENS