Essilor Instruments DELTA, User Manual, Page: 21 / 187

2. Working in the tracing - tracing mode
At the end of a tracing, the tracer-centerer-blocker displays the tracing screen.
• You can perform several tracing operations in succession
• The tracings are saved with the job number you have assigned to them
• Shape modification, centering, blocking and edging preparation are processed later
• All jobs must be saved
• After a job call the centering screen appears automatically, followed by the edging preparation screen
• You can access the centering screen at any moment to centre the lens that corresponds to the active
shape:
> Select then .
To activate this working mode, select the following parameters in the configuration screen:
(
F
p.129)
Blocking modes
There are 2 blocking modes:
1. The Shape’s Boxing Center Blocking
2. The Shape’s Optical Center Blocking
2. S
HAPE MANAGEMENT AND STORAGE
This section explains how to manage the job list to store your shapes.
• Description of the shape storage screen
(
F
p.24)
• Job list
(
F
p.26)
• Creating a job
(
F
p.26)
• Working in current job mode (job A)
(
F
p.27)
U
SER
M
ANUAL
> III. C
ARRY OUT AN OPTICAL TRACING
23
Delta - Edging System > V1- 02-2020