Installing the MGLS
Care@Home™ Indoor Magnetic Sensor User Guide
7
b.
Press the tamper switch at least three times.
Figure 5: MGLS Tamper Switch
The communication LED on the CP blinks green to confirm that the communication channel
between the MGLS and the CP is established. The handshake process is complete.
Figure 6: Green Communication LED on the CP
7.
Attach the smart magnet sensor onto the mounting-base.
Figure 7: Close Smart Magnetic Sensor
8.
Identify the location for mounting the MGLS. Refer to 2.2 Determining the Best Location on page
4.
Tamper Switch
Communication LED
