Installing the MGLS
Care@Home™ Indoor Magnetic Sensor User Guide
5
2.3.
Setting Up the MGLS
To set up the MGLS:
1.
Insert the flat screwdriver in the cover release tab opening, and press the tab to release the back
cover.
Figure 2: Release Back Cover
2.
If the MGLS is
not
from the Care@Home
™
kit, you must add the MGLS to the Care@Home
™
system
by “pairing” the MGLS device with the CP.
Press the
Pairing
button, located on the right edge of the front of the CP, for five (5) seconds. The
CP beeps and the ring, around the
EMERGENCY
button, lights up in blue with a circular movement
effect.
3.
Insert the battery, according to the battery diagram. Use a 3 V CR123A Lithium battery.
Figure 3: Battery Insertion
Cover Release
Tab Opening
