ESPEC PLATINOUS CHAMBER Series, Option Manual

Page: 25 / 93

Platinous Options Manual
Water Circuit
FIGURE 3.1. WATER TANK SYSTEM
3.1.2 Operation
Procedure:
To fill the Water Tank away from chamber
1.
Unplug 115VAC supply power from water pump system.
2.
Disconnect water system supply 3/8” hose using quick disconnect installed in hose.
3.
If the water tank system is recirculating type, disconnect the water tank return/drain hose from the hose
barb mounted near the top of the water tank.
4.
Unlock water tank base casters to allow movement of system.
5.
Roll the water tank system over to the water filling station. Fill tank and replace lid.
6.
Move the water tank system back to chamber.
7.
Lock water tank base casters to keep water system from moving.
8.
Re-connect the water system supply 3/8” hose using quick disconnect.
9.
If tank system is re-circulating, re-connect the water tank return/drain hose to the hose barb mounted
near the top of the water tank.
10.
Plug in water pump supply power cord to 115VAC source.
Note:
Be careful not to overfill. Use only 0.2 to 10
Ω
clean water (unless chamber is
equipped with a de-ionizing cartridge).
Water System
Bladder Tank
Water System
Supply Hose
Water System Air
Valve
Water System
Pump
Water Tank
& Cover
Water System
Return/Drain
Connection
Water System
Strainer