ESP Safety UPES-50D, Operating Manual, Page: 20 / 51

20
To reset the UPES settings, select the (“Reset Settings”) with the "+" and "-" buttons to select
("Yes") and press the ("Prog") button. The UPES settings with be set to their default values. By
default, UPES has the following settings:

Interface language is English;

Exchange rate is 9600 baud.

Modbus address — 1;

Exchange rate between the channel boards and primary detectors — 9600 baud.
The UPES setup menu is similar to the menu when there are no channel boards (fig. Error!
Reference source not found. ), except that if there are channel cards, the menu items
related to exchange rate setting of the channel boards are added.
The exchange rate between the channel boards and the sensors is set similarly to the speed
UPES exchange rate with the top-level system.
The exchange rate between the channel boards and primary transducers — 2400/4800/9600
(default)/19200 baud. The exchange rate for the channel card is set for both ports.