ESI ORIGINAL IVX, Installation Manual

Page: 16 / 114

F
OR
Y
OUR
S
AFETY
This information complies with the requirements of Underwriter’s
Laboratories and UL Standard 1459.
When using this telephone equipment, always exercise basic
safety precautions in order to minimize the risk of fire, electric
shock or injury to persons. Before proceeding, please read the
following:
The air-flow vents on the IVX case must be free of obstruction
for proper cooling. Similarly, do not install the cabinet in areas of
extreme heat or improper ventilation. Never insert objects of
any kind through the ventilation slots on the system cabinet.
Doing so may result in contact with dangerous voltages – or
cause an electrical short capable of producing fire or shock.
Do not use liquids or aerosols to clean any IVX equipment;
rather, use a cloth that is only slightly damp.
The IVX telephone/voice-mail system contains NO components
that are serviceable by non-dealers or non-manufacturer techni-
cians.
All service must be referred to the dealer for further
handling.
C
AUTIONS
P
OWER
S
UPPLY
Always disconnect the power supply and telephone lines from
the system cabinet before opening the case for service or com-
ponent disassembly or replacement.
Heed all warnings and instructions in documentation or marked
on the cabinet or peripheral equipment.
F
USE
Contact the factory prior to attempting to replace the fuse. The
fuse is located on the mother-board directly next to the power
jack marked with “F1”.
IVX
2.2 H
ARDWARE
I
NSTALLATION