•
Now all buttons and pads of the Xjam will successively light up yellow, and then
turn o
ff
again. At this time, Xjam has returned to factory state.
Note:
Some global parameters, such as
G.CH
,
OCTAVE
and
TRANS
(GLOBAL MIDI
CHANNEL, OCTAVE and TRANSPOSE) will always remain through all the 48
SCENES
. That means you cannot set the GLOBAL MIDI CHANNEL for the Xjam
device to Channel 4 for
SCENE
11 and
SCENE
5 is set to channel 16 as GLOBAL
MIDI Channel.
Important:
Performing the
RESET
function does not a
ff
ect any changes or editing
that have been applied to the four Dynamic User Curves. A Reset back to the
Factory User Curves can either be performed through the Xjam’s Editor App or by a
Reset to the Factory User Curves, which is explained in detail in this chapter:
5.3.7 SETUP Pads Velocity Sensitivity
5.3 SETUP Global Parameters
5.3.1 SETUP Octave Shift for Pads’ Notes
With Xpad you can shift the pads’ note keys by 4 octaves up and three octaves
down.
To shift octaves for pads’ notes:
•
Press
SETUP
, the red
SETUP
, LED will illuminate steady.
•
Press
OCTAVE
in the pad area (Pad 1).
Page of
14
37
Summary of Contents for Artesia Pro XJam
Page 1: ...MIDI Performance Controller USER GUIDE...
Page 2: ......
Page 40: ...Manual Version 1 0...
