1. SPECIFICATIONS.
2
Output:
Relay:
Maximum resistive
load (for example, heater):
Maximum inductive
load (for example, engine):
30A 250V~
5
10 cycles
20A, 4500W
8A, 1500W, 2HP(2KM)
2. OUTPUT CARRYING CAPACITY
3. FRONT PANEL.
OUTPUT1
reset
START/PAUSE/STOP commands
OUTPUT 1 signalling: LIGHTS: output active
time setting signalling
time display
timing and time setting T1 signalling
time setting T1 and value increasing key
timing and time setting T2 signalling
time setting T2 and value increasing key
button releasing RESET command
and entry to the configuration menu
start
stop
Digital input:
230VAC ±15% or 12VAC/DC or 24VAC/DC, max 3VA
Operating conditions:
-5...60°C; 0...85%RH (non-condensing)
Storage conditions:
-40...85°C; 0...85%RH (non-condensing)
Power supply:
D1: triggering START, STOP, PAUSE commands
D2: triggering RESET command
Measuring time accuracy:
±0,1%
Display and time unit setting
method:
User-selectable:
minutes:seconds (resolution: 1 second)
hours:minutes (resolution 1 minute)
Work mode:
Time relay or time counter,
6 user-selectable operating modes with automatic or
manual reset function
Display:
LED, 4 digits 11mm height with graphic icons
Protection class:
IP65 / II
Time range:
1s...99h59min, configurable, two sub-ranges
Time counting :
Onward (from zero to set time)
Reversing (from set time to zero)
Input signal:
Potential free, by transmission closing impulse on
contacts 2-3(RESET)and 4-5(START,STOP,PAUSE),
minimum impulse time 100ms
Output:
Relay, 20A 250VAC
Time settings:
T1 or T1 and T2