PDA WEB INTERFACE WD052-1-1
3/16/2006
6640 Intech Blvd. Suite 250 Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
Step 6
If WEP was selected, select the Key
field, specify the Key Type and enter the
required WEP key. Then select OK.
If WPA-PSK was selected, select the Key
field and enter the required passphrase.
Then select OK.
Step 7
Once the above process has been properly completed select Done. You will now be able to
access your wireless network from your handheld device.
Using a Microsoft Windows Mobile Device
Monitoring Signal Strength and Status
Step 1
To view the signal strength between your handheld device and wireless access point/router tap the
Connections
icon in the Navigation bar.
Step 2
When the
Connectivity
box displays, you will be able to view the type of network the handheld device is
connected to as well as an icon displaying signal strength.
Note: Signal strength will not be displayed if a
connection is not present.
Step 3
To make changes to the connection settings, tap
Settings
.
Step 4
To exit the
Connectivity
box, tap the
Hide
button.
Setting up a Wi-Fi Connection
Step 1
You can either add a wireless network when an existing network is detected or add a network by entering
the required settings manually.
Step 2
To manually enter information, tap
Start > Settings > Connections
tab
> Network Cards > Wireless
tab.
Summary of Contents for FireBall MP-200
