6302
88_0_
Manual Ser
vice
ST90
0 NZ R
-e
motion
Flue
25
mm
25
mm
25
mm
50
mm
50
mm
25
mm
25
mm
25
mm
7.0
Clean
Pilot and M
ain
Bu
rner J
ets
:
With the burner remo
ved the burner jet is
now accessible. Remov
e the jet and clean
it using an appropriate method, such as
using a
micro drill or compressed
air.
8.0
Clean
Thermoco
uple:
With the Pilot Cover
removed you now
have access to clean the thermocoup
le. Do
this by wiping it down with a rag or other ap
propriate cleanin
g tools in
order to
remove any soot from the surface.
9.0
Paint Firebox
[if required]
:
If there are any scrapes or da
mage to the paint on the inside of the firebox you may
wish to touch up th
e paint. To do this
, use
a suitable high temperatu
re matt black
paint. Do not pu
t any paint on
th
e burner, as there is a risk
of blocking burner po
rts.
10.0
Inspect F
lue System
[if possible]
:
If you have access
to the flue system, inspec
t it for da
mage or potential blockages
(includ
ing the cowl). Ensure eac
h flue c
omponent is twist-locke
d into the adjacen
t
components,
and
that
there are no
combustible objects or
material within 25mm of
either side or below flue componen
ts or 50m
m above any flue comp
onents, as
shown in the diagram below:
11.0
Gene
ral Clean a
nd Inspec
tion
:
A general clean of the fire
should be undertaken by wiping down or dusting all
accessible
areas
and
surfaces.
