CAUTION
: Position hinges exactly as
shown in
Detail N
or table will not
operate correctly and could be damaged.
34
38
30
18
17
18
17
Detail M
ATTENTION:
If hinge is positioned as
shown below (
Detail M
), Rotate the
hinge as shown in
Detail N
. Do
not
take
the hinge off the table.
Detail N
Incorrect position
of hinge
Assembly
position of hinge
14
Figure
Or
Scan QR code with
your smartphone:
DO NOT OPEN THE TABLE TO PLAYING
POSITION UNTIL BOTH TOPS ARE
INSTALLED! DO NOT LEAVE TABLE
STANDING UNATTENDED. IT COULD BE
KNOCKED OVER CAUSING SERIOUS
BODILY INJURY OR PROPERTY DAMAGE.
34
HARDWARE NEEDED
30
38
1/4" Plastic
Washer
1/4-20 Locknut
(Qty. 2)
(Qty. 2)
1/4-20 X 1 1/2 Phillips
Truss Head Screw
(Qty. 2)
If you want to see a video on how to attach hinges to Strut tube go to:
http://www.escaladesports.com/customer-service/instruction-videos
22.
Attach Hinges (#18) to Strut Tubes (#17) as shown in
Figure 14
&
Detail N
. With hinge
positioned as shown, align hole in hinge with hole in Strut Tube and attach with ¼” Screw (#30),
Plastic Washer (#38) and Locknut (#34). Plastic Washer (#38) goes between Strut Tube and
Hinge. Tighten nut securely. Repeat for other Hinge.
CAUTION: Hinges must be positioned
exactly as shown or table will not operate correctly and could be damaged.
Note
: If hinge (#18) is positioned as shown in
Detail M
, you will have to rotate the hinge
to the position shown in
Detail N
.
DO NOT
unscrew the hinge, you can rotate the hinge
without unscrewing it from the table.
23.
With at least two adults
, repeat steps 19 through 22 for other table top assembly.
17
