Note
: Support Plate (#43)
must be on inside of Caster
Rail (#8) as shown.
8
43
8
32
32
31
31
3.
Attach Wood Bottom Board (#15) to Caster Beam
Assemblies (#8) as shown in
Figure 3
. Turn Caster Beams
as shown and attach board with four Carriage Bolts (#31)
and four Wing Nuts (#32). Tighten Wing Nuts securely.
32
31
(Qty. 4)
1/4-20 Wing Nut
HARDWARE NEEDED
1/4-20 X 3 1/4 Carriage Bolt
(Qty. 4)
NOTE: Make sure logos are right side up and
facing the outside as shown.
Caster
with
Lock
Caster
with
Lock
15
3
Figure
READ AND FOLLOW ALL ASSEMBLY, OPERATING, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO (2)
ADULTS ARE NEEDED TO PUT THIS TABLE TOGETHER!
6
CAUTION
