4.
Attach Strut Tubes (#17) and Linkages (#16) to Caster Beam Assemblies (#8) as shown in
Figure 4
.
a)
Loosen Bolts (#13) and Nuts (#28) so that Strut Tube (#17) can fit between Support Plate (#43) and Caster Beam
(#8) as shown in the
Top View
and
Figure 4
.
b)
Slide one Hex Bolt (#27) through Caster Beam (#8), one Plastic Washer (#39), Strut Tube (#17), Plastic Washer
(#39), Support Plate (#43) Spacer (#36), Linkage (#16) and Locknut (#28) as shown in
Figure 4
and
Top View
.
c)
Repeat on other end of Caster Beam (#8) and on second Caster Beam.
d)
Tighten Bolts (#13) and Nuts (#28) (installed in
Step 2
) securely.
e)
Tighten Nuts (#28) on Bolts (#27) securely but
DO NOT
over tighten, Strut Tube
must Pivot Freely.
3/8-16
Locknut
(Qty. 4)
28
HARDWARE NEEDED
27
3/8-16 x 3 1/2 Hex Head Bolt
(Qty. 4)
36
39
3/4" Long Spacer
(Qty. 4)
3/8" Plastic
Washer (Qty. 8)
Top View
27
39
36
28
17
43
12
16
13
13
8
Note
: Linkages and Strut
tubes must be turned as
shown or table will not
operate correctly.
8
16
17
16
27
36
28
39
17
28
4
Figure
7
