8
10
10
43
2.
Lay Support Plates (#43) on Caster Beam (#8) to line up holes, the distance between middle
holes to side holes is different, see
Front View
of
Figure 2
. Attach Stop Spools (#12) and
Support Plates (#43) to side of Caster Beam without logo with Bolts (#13) and Nuts (#28)
but
DO NOT
tighten completely yet this will be done in a later step. See
Figure 2
.
Repeat step for second Caster Beam.
13
28
43
12
8
Longer
Shorter
Longer
Shorter
Match holes in Support Plate (#43)
with Caster Beam (#8).
28
13
3/8-16 X 2 3/4 Hex Head Bolt
(Qty. 8)
3/8-16 Locknut
(Qty. 8)
Front View
HARDWARE NEEDED
Logo on
this side
2
Figure
5
