1of2
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
Assembly Instruction Sheet #IS-CSE9010
_R1
For Styles CSE9010PN and CSE9010EK
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
Package Contents
A
Mounting
Screw
x 3
Figure 1
STEP 1
remove Fixture
Hood, Shade and Styrofoam
from Fixture Body
-
A. Remove Fixture Hood by
unlock Lock Screw from
Fixture Body (G).
B. Remove the Package
Material and Shade inside
the Fixture Body (G).
Lock Screw
Fixture
Hood
B
Shade
STEP 2
Install Shade, Fixture
Hood and Bulb to Fixture Body
-
A. Pass Lock Washer (D), Fixture
Hood and Water Proof Washer
(B) over the Nipple (E), secure
by threading Finial (B) onto
Nipple (E). Hand tighten until
sung.
B. Insert bulb and screw snugly into
place.
C. Place Shade (G) into Fixture
Body (F) properly. Then Place
the Fixture Hood onto the top
edge of the Fixture Body (F) and
secure with Lock Screws.
Tighten until snug.
Fixture
Hood
Lock
Screw
F
Figure 2
B
Finial
x 1
C
Water Proof
Washer
x 1
D
Lock
Washer
x 1
E
Nipple
x 1
Fixture
Body
x 1
F
Shade
x 1
G
D
E
G
B
C
Package
Material
Please go to
for product cleaning tips. Go to the
selection.
(1) Medium Base 150W bulb Maximum or
(1) Medium Base Vintage Bulb is recommended but not supplied.
30-45 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
www.quoizel.com
Care + Maintenance
Light Source:
Estimated Assembly Time:
Preparation:
Tools Required:
Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Vintage Bulb
(recommended
but not supplied)
STEP 3
-
Mark the Location for the 3 Mounting Holes
A. Place the light fixture onto the post and mark the location of the 3
mounting holes on the fixture fitter onto the post with the marking
pen.
Fixture
Fitter
Marking Pen
Mounting
Hole
Post
Lighting
Post
Post
Fixture
Fitter
Figure 4
2017 QuoizelInc.
RevisedDate:2017-10-25
