SECTION 3
PCM-875A Mechanized Plasma Cutting System
Installation
3-15
3.4.1 Installing Torch Front End Parts
WARNING
!
Make sure power switch on console is in
OFF position and primary input power is
de-energized.
Seat
Wrench
21375
1. The seat comes assembled to the front end
of the torch. IF the seat becomes damaged, the
torch body must be replaced. DO NOT attempt
to remove the seat from torch body.
Electrode Holder Assembly
Baffle Tube
2. Electrode holder assembly (21332) includes
the baffle tube (21374). If baffle tube becomes
damaged, it can be replaced by un-threading the
damaged tube out of the holder. Use small hex
end of the wrench (21375) in hex broach on the
tube. Tighten tube securely but do not over-
tighten.
