SECTION 1
PCM-875A Mechanized Plasma Cutting System
SAFETY
1-8
WARNING
!
Burn Hazard.
Heat, spatter, and sparks cause fire and burns.
·
Do not cut near combustible material.
·
Do not have on your person any combustibles
(e.g. butane lighter).
·
Pilot arc can cause burns. Keep torch nozzle
away from yourself and others when activating
plasma process.
·
Wear correct eye and body protection.
·
Wear gauntlet gloves, safety shoes and hat.
·
Wear flame-retardant clothing covering all
exposed areas.
·
Wear cuffless trousers to prevent entry of
sparks and slag.
·
Have fire extinguishing equipment available for
use.
WARNING
!
Explosion hazard.
·
Certain molten aluminum-lithium (Al-Li) alloys
can cause explosions when plasma cut OVER
water.
§
These alloys should only be dry cut on a
dry table.
§
DO NOT dry cut over water.
§
Contact your aluminum supplier for
additional safety information regarding
hazards associated with these alloys
.
·
Do not cut in atmospheres containing
explosive dust or vapors.
·
Do not carry any combustibles on your person
(e.g. butane lighter)
·
Do not cut containers that have held
combustibles.
