S0740 800 196/E101019/P76
- 74 -
ca41i1
FAULT-TRACING
Try these recommended checks and inspections before sending for an authorized service
technician.
Type of fault
Corrective action
No arc
S
Check that the mains power supply switch is turned on.
S
Check that the welding and return cables are correctly connected.
S
Check that the correct current value is set.
S
Check the mains power supply fuses.
The welding current is
interrupted during
welding.
S
Check whether the overloading protection has tripped (indicated in the
control panel).
S
Check the mains power supply fuses.
The overloading
protection trips
frequently.
S
Check to see whether the dust filter is clogged.
S
Make sure that you are not exceeding the rated data for the power
source (i.e. that the unit is not being overloaded).
Poor welding perform
ance
S
Check that the welding and return cables are correctly connected.
S
Check that the correct current value is set.
S
Check that the correct wire or electrode is used.
S
Check the mains power supply fuses.
SPARE PARTS
The spare parts list is published in a separate document that can be downloaded from the
internet: www.esab.com
Product
Filename
Mig 3001i
0459 839 031
Tig 3001i
0459 839 033
Summary of Contents for Aristo Mig 3001i
