ESAB A2 PEK Instruction Manual Download Page 55

Page: 55 / 74

9 CONFIGURATION MENU

0460 949 474

- 55 -

STEP SPEED

The travel speed of the auto step (minimum setting 3 cm/min)

NUMBER OF STEPS

The number of steps during one rotational turn.

OVERLAP

The length of the overlap of one rotational turn.

MANUAL STEP LENGTH

The length of one manual step (minimum setting 1 mm)
(for singular manual adjustments during welding)

NOTE!

To be able to run the step function, STEP CONTROL must be in the ON position, the
EXT AXIS and AUTO STEP soft keys must be ON

If you want to have a restart of step, to restart step welding after a stop, press soft key

RESTART STEP

before you press the

AUTO STEP

before you start to weld.

For example, if you have 100 mm to next step, press

STOP

, change the wire, position the

object, press

RESTART STEP

, press

AUTO STEP

, and start to weld. Next step will be after

100 mm.

When the “one turn switch” is activated, the step function executes one auto step in the
direction and with the speed and length specified by the

STEP DIRECTION

STEP SPEED

and

STEP LENGTH

parameters.

If the FORCE STEP soft key is pushed, the step function executes one auto step in the
direction and with the speed and length specified by the

STEP DIRECTION

STEP SPEED

and

STEP LENGTH

parameters.

If the square/triangle button is pushed, one manual step will be executed in the direction and
with the speed and length specified by the square/triangle,

STEP SPEED

and

STEP

LENGTH

parameters. This function can be used to make one small adjustment during

welding.

There is always a possibility to interrupt an auto step or manual step movement by pushing
the

SQUARE

TRIANGLE

button.

During the auto step or manual step movement, the LED above the square/triangle button is
on to indicate movement and direction.

Speed wheel settings

When the positioner and the speed wheel are ON the speed wheel (encoder) is at the
welding object.

When the positioner and the speed wheel are OFF the encoder is at the motor shaft.

When the roller bed and the speed wheel are ON the speed wheel (encoder) is at the roller
bed wheel.

When the roller bed and the speed wheel are OFF the encoder is at the motor shaft.

Summary of Contents for A2 PEK











































































Search results

Summary of Contents for A2 PEK

Reviews:

Related manuals for A2 PEK

Brands by name

Popular brands

ESAB A2 PEK, Instruction Manual

Search results

Summary of Contents for A2 PEK

Reviews:

Related manuals for A2 PEK

Brands by name

Popular brands