DESCRIPTION OF THE PRODUCT
Descripcion_V.
00.fm -
14/3/16
DINGO operator for sliding gates
47
6
MANUAL OPERATION
The gate may be operated manually if needed:
Unlocking for manual operation Motorised
operation locking
7
DECLARATION OF CONFORMITY
Erreka Automatismos declares that the DINGO operator
has been designed for use in a machine or for assembly
along with other elements in order to form a machine
in line with Directive 2006/42/EC.
The DINGO operator can be used to carry out
installations in line with standards EN 13241-1 and
EN 12453, provided it is correctly and suitably installed.
The installer shall be responsible for proper installation.
The DINGO operator complies with safety legislation in
line with the following directives and standards:
•
2006/95/EC (low voltage materials)
•
2004/108/EC (electromagnetic compatibility)
•
UNE-EN 60335-1
3
180º
D259A
1
Insert the key (1) and turn clockwise 180º
without forcing it:
The rack drive pinion will come down from
its operating position, releasing the rack.
3
180º
D259B
1
Insert the key and turn it anti-clockwise 180º as
far as it will go.
The pinion will return to its work position, in
contact with the rack.
2
Activate a key device in order for the gate to
carry out a "reset".
