Pogra
m
ac
ion
_v.00.fm -
14/3
/16
START UP AND PROGRAMMING
DINGO operator for sliding gates
55
3
PROGRAMMING SEQUENCE
Before entering the programming menus, it is
necessary to close the gate or disconnect the device
and then reconnect.
Press the ENTER button to access the programming
menus.
The display shows “
C
”
1
01
or “
C
”
1
0
2
.
Use the keys ^ and
V
to select the required values,
and confirm by pressing ENTER.
Use ESC to go back to the previous display.
To leave the programming menu, press ESC several
times until the display goes off or shows
CL
.
1
Programme the prior conditions (see “Initial
Conditions Programming (D1= “
C
”)” on page 55).
2
Programme the pedestrian and total opening radio
codes, along with the gate open/close (see “Radio
code programming (only with RSD) and gate open/
close programming (D1= “
P
”)” on page 56).
3
Programme the functioning mode, automatic
standby time and pedestrian opening (see “Main
Functions Programming (D1= “
F
”)” on page 56).
4
Programme the advanced functions (see “Advanced
Functions Programming (D1= “
A
”)” on page 57).
Initial Conditions Programming (D1= “
C
”)
1
Press ENTER to access the programming menus. The
display lights up and D1 flashes.
2
Press the buttons ^ and
V
until D1 shows the letter
C
C
flashing. Press ENTER to confirm. D2 flashes.
3
Press the buttons ^ and
V
until the required D2
parameter appears. Press ENTER to confirm. D3 and
D4 flash.
4
Press the buttons ^ and
V
until the required D3 and
D4 value appears (see chart). Press ENTER to
confirm.
5
Press ESC to return to the previous display.
Display
D1
D2
D3 - D4
off
or
showing
CL
ENTER
á
Select the value
using ^ and
V
ENTER
á
Select the value
using ^ and
V
ENTER
á
Select the value using
^ and
V
ESC
à
ESC
à
ENTER
(confirming)
à
ESC
(unconfirmed)
à
C
1
0 X
General navigation through the programming parameters and menus
D1
D2
Parameter
D3
D4
Default
option
Options
C
1
Motor turning direction
0
1
x
0
2
4
Opening safety device (photocell
or strip)
0
0
x
Device not installed
1
0
Device without testing
1
1
Device with testing
5
Closing safety device (photocell
or strip)
0
0
x
Device not installed
1
0
Device without testing
1
1
Device with testing
