Erreka ARES AE3324D, Installer Manual

Page: 31 / 64

English
Descripcion_68 v0
.2.fm -
9/4/16
ARES electro-mechanical operator
27
DESCRIPTION OF THE PRODUCT
1
ELEMENTS OF THE COMPLETE INSTALLATION
Fig. 1 Elements of the complete installation

The safe and correct operation of the
installation is the responsibility of the installer.

For greater safety, Erreka recommends installing the
photocells (3) and (8).
INSTALLATION COMPONENTS:
1
Operator
2 Flashing light
3 Exterior photocells
4 Key switch
5 Wall pushbutton
6 Switchboard
7 Connections box
8 Interior photocells
9 Electrolock
10 Stop on closing
11 Antenna

We recommend using the VIVO-M201(M) or VIVO-M101(M) switchboard for the 125/230VAC models
and the VIVO-D201(M) switchboard for the 24VDC models.
ELECTRICAL CABLING:
Element Nº wires x section Maximum length
A: Main power supply 3x1.5mm
2
30m
B: Flashing light 2x0.5mm
2
20m
C: Photocells (Tx / Rx) 2x0.5mm
2
/ 4x0.5mm
2
30m
D: Pushbutton or key switch 2x0.5mm
2
25m
E: Operator (125/230 VAC) 4x1mm
2
20m
E: Operator (24VDC) 2x1mm
2
8m (maximum 25m with cable 2x2.5mm
2
)
F: Antenna Coaxial cable 50
k
(RG-58/U) 5m