Instalacion_68 v0.0.fm
- 9/4/16
INSTALLATION
32
Installation Manual
Levelling
Mount the wall support
Position the gate support
Mount the operator on the wall support
Mount the operator on the gate support
The supports should be positioned so as the operator forms an angle of 1° with regards
to the horizontal, remaining lower on the gate support side.
1
1
Respect the levels indicated in
“Assembly
positions and levels”
on page 31.
The screws (1) and plugs (2) are not
supplied. Use screws and plugs which are
suitable for the place of attachment and the
weight and effort of the operator.
Respect the levels indicated in
“Assembly
positions and levels”
on page 31 and the slant
of the operator (see
“Levelling”
on page 32).
The screws (5) are not supplied. Use screws
which are suitable for the place of
attachment and the effort required.
Introduce the shaft (3) and secure with the cap
(4), using a 6 mm Allen key.
1
1
Introduce the shaft (6) and secure with the cap
(7), using a 6 mm allen key.
Summary of Contents for ARES AE3324D
