erowa ER-060530 Manual Download Page 2

ER-060530

ER-062138

2

DOC-084657-00

PM Tooling

PM Tooling

Outillage PM

Steht für eine unmittelbar drohende Ge-

fahr, die zu schweren, irreversiblen Kör-

perverletzungen oder zum Tod führt.

Steht für eine möglicherweise gefährliche 

Situation, die zu schweren Körperverlet-

zungen führen können.

Steht für eine möglicherweise gefährliche 

Situation, die zu leichten Körperverlet-

zungen führen könnte.

Steht für eine möglicherweise schädliche 

Situation, bei der das Produkt oder eine 

Sache in seiner Umgebung beschädigt 

werden könnte.

Steht für Anwendungshinweise und 

andere nützliche Informationen.

GEFAHR

WARNUNG

VORSICHT

HINWEIS

WICHTIG

Symbolerklärung

Das EROWA Produkt wurde nach den all-

gemein anerkannten Regeln der Technik 

und dem aktuellen Stand von Wissen-

schaft und Technik gefertigt. Dennoch ge-

hen von Maschinen Risiken aus, die sich 

konstruktiv nicht vermeiden lassen. Um 

dem mit dem EROWA Produkt arbeiten-

den Personal ausreichend Sicherheit zu 

gewährleisten, werden zusätzlich Sicher-

heitshinweise gegeben. Nur wenn diese 

beachtet werden, ist hinreichende Si-

cherheit beim Umgang mit dem EROWA  

Produkt gewährleistet. Bestimmte Text-

stellen sind besonders hervorgehoben. 

Die so gekennzeichneten Stellen haben 

folgende Bedeutung:

Highlights an immediate thread of danger 

that will cause serious, irreversible physi-

cal injury or death.

Highlights a possible dangerous situation 

that could cause serious physical injury.

Highlights a possible dangerous situation 

that could cause minor physical injury.

Highlights a possible harmful situation in 

which the product or an object in the vicin-

ity could be damaged.

Highlights information on usage and other 

useful information.

Explanation of the symbols

The EROWA Product has been manufac-

tured according to the generally recog-

nized rules of technology and the state of 

the art of science and technology. Even 

so, machines involve risks which cannot 

be avoided by means of design and con-

struction. In order to provide personnel 

working with the EROWA Product with ad-

equate safety, additional precautions are 

provided. Adequate safety at work with 

the  EROWA Product can only be ensured 

if these precautions are being followed. 

Certain passages have been marked in a 

particular way. The passages marked in 

this manner have the following meaning:

DANGER

WARNING

CAUTION

ADVICE

IMPORTANT

Signale un danger qui vous menace 

directement et qui provoque de graves 

blessures corporelles ou la mort.

Signale une situation potentiellement 

dangereuse susceptible de provoquer de 

graves blessures corporelles.

Signale une situation potentiellement 

dangereuse susceptible de provoquer 

des blessures corporelles légères.

Signale une situation potentiellement 

néfaste dans laquelle le produit ou un 

objet placé à proximité de lui risque d’être 

endommagé.

Signale des consignes d’utilisation et 

d’autres informations utiles.

Description des symboles utilisés

Le Produit EROWA a été conçu en fonc-

tion des règles techniques généralement 

admises et de l’état actuel des connais-

sances scientifiques et techniques. Il 

n’en reste pas moins que toute machine 

présente nécessairement des risques qui 

ne peuvent pas être entièrement éliminés 

par la seule approche conceptuelle. D’où 

la prescription de consignes de sécu-

rité spécifiques pour assurer une sécurité 

maximale au personnel travaillant sur le 

Produit EROWA. Seule l’observation de 

ces consignes de sécurité permet d’assu-

rer une sécurité suffisante aux personnes 

dans leurs rapports avec le Produit ERO-

WA. Certains passages ont été mis en évi-

dence. Ils ont les significations suivantes :

DANGER

AVERTISSEMENT

ATTENTION

INDICATION

IMPORTANT

Summary of Contents for ER-060530












Reviews: