Orion/3-DN Outdoor
67
FRAME SET
In a monitored field, users can define specific areas as motion detection
target zones. Please refer to the instructions as follows to configure
parameters for each motion detection zone so-called
“Frame.” When
motion is detected within a defined frame, a flash warning notice:
MOTION, will display in the upper left corner of the screen.
Total four frames can be set. Select a frame using the right/left keys on
the keyboard, and press
“ENTER” key to enter the frame’s submenu, as
shown below.
LEFT LIMIT
Move the frame right/left using the right/left keys on the keyboard.
TOP LIMIT
Shift the frame up/down using the right/left keys on the keyboard.
H/V SIZE
Adjust the frame size via changing H/V size value using the right/left
keys on the keyboard.
MODE
Assign a trigger action for a motion detection frame. Options include
PRESET, SEQUENCE, AUTOPAN and CRUISE. When motion is
detected within a frame, the Dome Camera will execute the specific
trigger action.
DWELL TIME
The DWELL TIME is duration of executing a trigger action. If select
the PRESET mode, when motion is detected, the Dome Camera will
go to the selected Preset position and stay there for a user-defined
period of time (1~127 seconds/Always) until alarm condition is
FRAME SET 1
LEFT LIMIT
L/R
TOP LIMIT
D/U
H SIZE
000
V SIZE
000
MODE
PRESET
PRESET POINT
001
DWELL TIME
001 SEC
EXIT
YES
