Orion/3-DN Outdoor
45
M.E. (Mechanical Flip)
M.E. is a standard mechanical operation. As the Dome Camera tilts
to the maximum angle, it will pan 180°, and then continue tilting to
keep tracking objects.
NOTE:
Flip setting is manual-controlled only. If a Preset or a point
for other function (ex. Sequence) is set in the position that can only
be reached through FLIP motion, when Flip is off, the position
cannot be reached anymore.
OFF
Select this item to disable the flip function.
NOTE:
To
make the Dome Camera tilt between a specific range,
such as -10° to +100° or -10
°
to +190
°
, please go to
ANGLE
ADJUSTER
(see next section) to set the angle range of tilt.
Otherwise, the dome will tilt 90° as the default setting.
ANGLE ADJUSTER
The item is for adjusting the angle range of tilt motion. The Range of the
tilt motion varies in different FLIP modes: the angle ranges from -10
°
to
+100
°
in the M.E. FLIP and FLIP OFF modes, and from -10
°
to +190
°
in
the IMAGE FLIP mode.
PT POSITION (S Series Model)
PT Position can display the Pan/ Tilt position of Dome Camera on the
screen. Refer to
3.1 Display Format
for the item displayed location.
PT POSITION
PT DISPLAY
OFF
SET PAN ZERO
PT MOVE
EXIT + SET
YES
B GAIN
ANGLE ADJUSTER
ADJUST MIN ANGLE
-10DEG
ADJUST MAX ANGLE
100DEG
EXIT + SET
YES
B GAIN
50
