Orion/3-DN Outdoor
52
3.3.13
SEQUENCE
The function executes pre-positioning of the pan, tilt, zoom and focus features
in a certain sequence for a camera. Before setting this function, users must
pre-define at least two preset points.
SEQUENCE LINE
There are eight sets of sequence lines built in the Dome Camera. Using
LEFT/RIGHT direction keys to select a line first and then set its sequence
points.
SEQUENCE POINT
Up to 64 points can be setup for each Sequence line. The Sequence
Points represent order of the preset points that the Dome Camera will
automatically run. The following setup items, including PRESET
POSITION, SPEED and DWELL TIME, will influence how the camera
runs through each sequence point.
PRESET POSITION
Users can assign a specific preset position to the selected Sequence
Point with this item. Options include
“1~255” and “END.” END is used for
the Sequence Point following the last Sequence Point when the amount
of sequence points (see the previous section) is less than 32 points.
NOTE:
If not using all 64 points, please set the point following the
last Sequence Point as
“END” (PRESET POSITION) so that the
sequence line can work properly. For example, if a user intends
to set a Sequence Line with 5 sequence points. It is required to
set the PRESET POSITION of Sequence Point 06 as
“END.”
SEQUENCE
SEQUENCE LINE
1
SEQUENCE POINT
01
PRESET POSITION
001
SPEED
01
DWELL TIME
001
RUN SEQUENCE
ENTER
EXIT
YES
