Orion/3-DN Outdoor
64
CRUISE LINE
Select a cruise line that the Dome Camera should execute when an
alarm pin is triggered. The cruise line(s) should be defined prior either in
the CRUISE setup menu or through the keyboard.
DWELL TIME
The DWELL TIME is duration of executing an alarm action. If the
PRESET mode is selected, the Dome Camera will go to the selected
preset position and stay there for a user-defined period of time
(1~127seconds/Always) when alarm takes place until alarm condition is
released or users rotate the joystick to change the status of the Dome
Camera.
If other modes (SEQUENCE/AUTOPAN/CRUISE) have been selected,
the camera will keep executing the selected mode (DWELL TIME:
ALWAYS) until alarm condition is released or users rotate the joystick to
change the status of the Dome Camera.
NOTE:
The dwell time is only adjustable when selecting
Preset
as the alarm action. When the dwell time is up, the Dome
Camera will go back to its trigger position and recheck alarm pin
status.
ALARM PRIORITY
Set alarm priority from <1> to <8> for each alarm pin. If two or more
alarms are triggered at the same time, smaller alarm priority number will
have higher priority of being handled. The default alarm priority is <1>.
EXIT
Exit the ALARM SETTING menu and go back to the
MAIN PAGE 3
to
carry on setup of Alarm Detect (G/V/T/P/M models only).
G/V/T/P/M Model:
MAIN PAGE 3
IR FUNCTION
AUTO
ALARM SETTING
ENTER
ALARM DETECT
OFF
WDR FUNCTION
OFF
PRIVACY MASK
ENTER
TIME SETTING ENTER
SCHEDULE
ENTER
EXIT OSD
YES
