Orion/3-DN Outdoor
28
3.3
Configuration Menu
The detailed functions and parameter settings of your high speed dome can
be set through the OSD (On Screen Display) menu with a control device,
such as a control keyboard. The items in each model
’s OSD menu are
described in the following sections.
To enter the OSD menu
of the selected camera, press the <CAMERA
MENU> key on the control keyboard and hold it for 3 seconds to enter the
OSD menu.
To select the setup item,
use direction keys on a keyboard to move the OSD
cursor in the OSD menu.
To setup items,
use direction keys on a keyboard to move the OSD cursor in
the OSD menu. For items with
→
, press right/left direction keys on the control
keyboard to select. For items with
↓
, press the <CAMERA MENU> key on
the control keyboard to enter their sub menus. For items with
→↓
, users can
use the right/left direction key to select functions, and then press the
<CAMERA MENU> key on the control keyboard to enter their sub menus.
For further detailed setup procedures, pl
ease refer to the user’s manual of
your installed control devices.
NOTE:
In the Camera OSD menu, the <CAMERA MENU> key
functions as
“ENTER” and “EXIT.”
During the Speed Dome Camera
’s start-up, the
OSD Start Page
will display
information including ID number, protocol/baudrate and camera initializing
message. Furthermore, when some camera errors occur, the error
message(s) will be shown on the screen. If the problem(s) cannot be solved
at once, please contact your supplier for assistance.
