Orion/3-DN Outdoor
51
3.3.12
PRESET
PRESET SET
Totally 256 preset points can be set. Follow the steps below when in the
preset setting menu.
STEP 1: Press the right/left key on the keyboard to select a number (001
represents preset point 1, 002 represents preset point 2, etc.)
STEP 2: Press the <
CAMERA MENU
> key (ENTER) on the keyboard,
and then move the Dome Camera to a targeted shooting
area/point.
STEP 3: Press the <
CAMERA MENU
> key again to save the defined
preset point.
Once completing setup of a preset point, users could move the cursor to the
next item to run the preset point.
PRESET RUN
Press the <
CAMERA MENU
> key (ENTER), and the camera will go to
the appointed point. To run other defined preset point, simply press the
right/left key on the keyboard, select the preset point that you want to go,
and press the <
CAMERA MENU
> key (ENTER) again.
EXIT
Exit the PRESET
menu and go back to the
MAIN PAGE 2
to carry on
setup of Sequence.
NOTE:
Users could set Preset Points through a keyboard. Please
refer to the control keyboard
’s quick guide for further information.
MAIN PAGE 2
ID DISPLAY
ON
TITLE DISPLAY OFF
TITLE SETTING
01
PRESET
ENTER
SEQUENCE ENTER
AUTOPAN
ENTER
CRUISE
ENTER
HOME SETTING
ENTER
