DigiOpG2
Digital Video Recorder
Page
40
3040-00052
6.8
Camera-Audio & P/T/Z
Set the camera audio and P/T/Z environment.
6.8.1.
Audio
Select whether to use audio recording. Select On/Off in the audio tap for each camera.
Note
Use amplifier-equipped devices when connecting to the audio input/output device.
6.8.2.
Audio-CH
Select the audio channel to use among the 4 audio input channels.
6.8.3.
P/T/Z Address
Set the P/T/Z driver address of the connected camera.
Check the below items for proper P/T/Z operation.
1.
Check if the protocol of all P/T/Z controllers connected to the system is in accordance.
2.
Check if the communication setting including baud rate of all P/T/Z controllers is in accordance with the assigned value for
that P/T/Z protocol.
3.
Check if the address of all controllers is in accordance with the controller address assigned in the setting menu for that
channel.
4.
Check if the power of the P/T/Z controller is turned on.
5.
Check if wiring to P/T/Z controllers is correct.
