DigiOpG2
Digital Video Recorder
Page
3
3040-00052
Cautions
Read Before System Operation
Follow these details to prevent material damage or personal injury.
Signs of Caution and Warning
Warning: This sign indicates that the user could be seriously wounded or
expect property damage if not
used or installed properly.
Important Safeguards
Warning
1. Use the power cord, which is supplied or recommended by the supplier.
2. Do not dismantle or assemble the product.
It may cause malfunction or fire.
3. Do not touch the product with wet hands.
It may cause malfunction or fire.
4. Matters must be ensured to a professional product installation.
Delinquent installation may be the reason for malfunction, electric shock or fire.
5. Ground connection must be done. If grounding is not done, it may cause malfunction or electric shock.
6. Ground connection must not touch gas pipe, water pipe or telephone line.
7. Prevent metallic foreign substance from going inside the product.
It may cause malfunction or electric shock.
8. Do not spray insecticide or flammable spray while equipment is switch on.
It may cause fire.
9. Prevent water from entering inside electrical parts.
10. Do not drop, give strong vibration, or shock to the product.
It may cause malfunction.
11. The air inhaler of the front panel and air outlet of the back panel must not be blocked during installation or
the internal temperature of the product could be greater than allowable and cause malfunction or
fire.
12. Do not touch the product or the power cord when there is thunder.
It may cause electric shock.
13. Do not install the product near or on top of heating source.
The internal temperature of the product could be greater than allowable and cause malfunction or
fire.
14. Do not install the product on inclined or unstable location or where vibration could be committed.
It may cause malfunction.
15. Do not touch the power cord with wet hands.
It may cause electric shock.
16. Hold the body of the plug while removing the power plug.
Do not pull the power cord. Damage to the power cord may generate heat or cause fire.
17. Remove power cord from outlet when product is not used for a long time.
It may cause a short-circuit or electric shock.
18. Do not turn off the power by removal of the power plug.
To turn off the power, click the power button from the front panel.
When the system stops abnormally, the power button might not work. Click power button for 5 full seconds to turn
power off.
19. Do not cut off the power artificially, or give shock or vibration to unit while the hard disk is activating.
It may cause hard disk failure or loss of data.
