DigiOpG2
Digital Video Recorder
Page
10
3040-00052
Fast Playback Backwards Button
20
Playback Button
21
Fast Playback Forward Button
22
Playback Backward Frame by
Frame
23
Pause Button
24
Playback Forward Frame by Frame
25
OSD Button
26
P/T/Z Button
27
SEQ Button
28
Note
Button #16: F/O/E Button (use only on remote controller)
The object in the recorded image might show the feathering effect during frame playback because images at
720x480(PAL:720×576) resolution have higher vertical resolution than 640x240(PAL:640×288) or 352×240
(PAL:352×288). The feathering of the image can be solved when only one of two Fields (Odd, Even Field) is
selected. Default is frame playback. When the button is pressed, it will change to Odd Field Playback-> Even Field
Playback-> Frame Playback order.
Note
To use the IR Remote Controller, synchronize front panel button and IR remote controller by inputting the initial ID.
The user requires setting the ID only once. Refer to “Settings” for detailed information about ID input.
Note
When the IR Remote Controller is used to change the channel, no. 1 button is also used to select channels after
number 10. Press no. 1 button and it will be ready to add another extra number. Example, press no. 1 and once it is
ready to add another no., press 2. Then, channel will change to channel no. 12. But press no. 1 button for few
seconds and the channel will go to no. 1 channel.
2.3
Rear Panel
The following is the rear panel of the EDNS-3000 series system. The picture below is EDNS3000-16EP model.
Note
The configuration differs according to the model.
