ERL F-PRO 5100, User Manual

Page: 27 / 192

Modify IP address Modifies the LAN IP address when equipped with an
optional internal 10BaseT Ethernet card.
View system diagnostic Displays the internal status log.
Retrieve system diagnostics Automatically packages up the internal status log plus set-
ting and setup information and downloads it in compressed
form to your computer. This file can then be sent to our cus-
tomer support to help diagnose a problem.
Restore settings Use this menu to force the system back to default values, if
you suspect a problem due to the unit’s settings, calibration
and/or setup parameters.
Force hardware reset Manually initiates a hardware reset. Note that the communi-
cation link is immediately lost and cannot be re-established
until the unit completes its start-up.
View network statistics View IP, TCP and UDP statistics when equipped with inter-
nal 10BaseT Ethernet card.
Monitor SCADA Shows real time display of SCADA data.
Enable/disable Modem Enables or disables the internal modem.
2 Setup and Communications
D02416R04.00 F-PRO 5100 User Manual 2-13
Firmware Update
The relay has an update login that can be accessed by a connection through a
VT100 terminal emulator (such as HyperTerminal). This login is available
only from Port 1.
1 Use the terminal program to connect to Port 1.
2 Select
Enter , the terminal responds with a login prompt.
3 Login as update in lower case.
4 Relay responds with "password" prompt.
Figure 2.8: Firmware Update password prompt
5 Enter password.
The firmware update is used to update the relay’s software with maintenance
or enhancement releases. Please see the B-PRO Firmware Update Procedure
documentation that comes with the firmware update for instructions on how to
update the firmware.