Ericsson T39 At Command Reference Download Page 68

Page: 68 / 224

AT Commands Phone Terminal Terminated

AT+CPWD

Change Password

“AG”

All outGoing barring services

“AC”

All inComing barring services

<mode>:

<mode>

Description

Unlock

Lock

Query status
Gives the response
+CLCK: <status>,<class1>

<CR><LF>

[+CLCK: <status>,<class2>

<CR><LF>

[...]]

Full lock (only valid for <fac>=”PS”; after power-on, always
ask for password

<passwd>:

String; the same as the password specified for the facility from the ME user interface or
with

AT+CPWD

<class

Integer; sum of integers, each representing a class of information.

<class

Description

Voice L1

Data

Fax

8-127

Also all other values below 128 are reserved by ETSI

128

Voice L2

If no value is specified, all classes are included.

Note

: “PS” and <mode>=1 correspond to Auto Lock

Description:

Sets a new password for the facility lock function defined by the

AT+CLCK

command.

Set command:

AT+CPWD=

Test command:

AT+CPWD=?

Shows if the command is supported.

Test command
response:

+CPWD: (list of supported <fac>s),(list of supported <pwd_length>s)

Parameters:

<fac>:

<fac>

Description

“PS”

PH-SIM (lock phone to SIM card)
The ME asks for the password when other-than-current SIM
card is inserted

“SC”

SIM (lock SIM card)
The ME asks for the password when the ME is in power-up
and when the lock command is issued

<fac>

Description

Summary of Contents for T39

































































































































































































































Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands

Ericsson T39, At Command Reference

Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands