Ericsson T39 At Command Reference Download Page 179

Page: 179 / 224

AT Commands Modem Terminated

177

AT+FK

Session Termination

AT+FLID

Local ID String

Read command:

AT+FET?

Displays the current <ppm> setting.

Test command:

AT+FET=?

Shows if the command is supported.

Test command
response:

+FET: (list of supported <ppm>s)

Parameter:

<ppm>:

<ppm>

Description

Another page next, same document

Another document next

No more page(s) or document(s)

Example:

AT+FET=0

+FTPS: 1

AT+FET?

AT+FET=?

+FET: (0-2)

Description:

Causes the TAE to terminate the session in an orderly manner.

Execution command:

AT+FK

Unsolicited result code:

+FHNG

: <hsc>

Example:

AT+FK

+FHNG: 2

Description:

Allows user to define the local ID string.

Set command:

AT+FLID=

<ID_string>

Read command:

AT+FLID?

Displays the current <ID_string> content.

Test command:

AT+FLID=?

Shows if the command is supported.

Test command
response:

+FLID: (<string length>)(supported ASCII values).

Parameter:

<ID_string>:

String; 20 characters.

Summary of Contents for T39

































































































































































































































Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands

Ericsson T39, At Command Reference

Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands