Ericsson T39 At Command Reference Download Page 37

Page: 37 / 224

AT Commands Phone Terminal Terminated

AT*EINA

System Interface Active

<ir_status>

IR status

<connected_status>

Desktop charger status

<connected_status>

Travel charger status

<connected_status>

External handset status

<connected_status>

Accessory status used for all accessories unknown to the
phone (<accessory_id>=13-255)

<connected_status>:

<connected_status>

Description

The device is not working

The device is connected and working

<ir_status>:

<ir_status>

Description

The device is not working

The device is connected and working

The device is connected and working and is searching for
other IrDA devices

The device is connected and working and is engaged in an
IrDA connection

The device is connected and working and is engaged in an
IrDA connection, but the IrDA beam is obstructed

<unique_id>:

<unique_id>

Description

Request a new unique identifier from the phone

1-65534

Unique identifier for a unique accessory

65535

Default value used by non-unique accessories

Description:

Returns the active interface (the interface currently used for communication).

Execution command:

AT*EINA

Execution command
response:

*EINA:

Test command:

AT*EINA=?

Shows if the command is supported.

Test command
response:

*EINA: (list of supported <interface>s)

Parameter:

<interface>:

Description

System connector

MC link

<status_value>

Description

Summary of Contents for T39

































































































































































































































Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands

Ericsson T39, At Command Reference

Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands