Ericsson T39 At Command Reference Download

Page: 81 / 224

AT Commands Phone Terminal Terminated

AT*ESIL

Silence Command

AT*ESKL

Key-Lock Mode

Parameters:

<place>:

<place>

Description

Hand-held

Car mounted

<mode>:

<mode>

Description

OFF, Back light always switched off

ON, always on

AUTO, backlight is turned on when the ME reacts to a user
event or when receiving a call
The light is then turned off after a short while

Description:

Orders the phone to enter or leave silent mode.

Set command:

AT*ESIL=

<mode>

Read command:

AT*ESIL?

Displays the current <mode> setting.

Test command:

AT*ESIL=?

Shows if the command is supported.

Test command
response:

*ESIL: (list of supported <mode>s)

Parameter:

<mode>:

<mode>

Description

Silent mode off

Default setting

Silent mode on

Description:

Sets the key-lock mode in the phone.

Set command:

AT*ESKL=

<mode>

Read command:

AT*ESKL?

Displays the current <mode> setting.

Test command:

AT*ESKL=?

Shows if the command is supported.

Test command
response:

*ESKL: (list of supported <mode>s)

Parameter:

<mode>:

<mode>

Description

MANUAL; the user has to manually lock the keyboard

Default setting

Summary of Contents for T39

































































































































































































































Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands

Ericsson T39, At Command Reference

Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands