Ericsson T39 At Command Reference Download Page 151

Page: 151 / 224

AT Commands Modem Terminated

149

5.2.1 Commands

ATA

Answer Incoming Call Command

ATH

Hook Control

ATD

Dial Command

5.2 Ensemble C3: Call Control

Description:

Answers and initiates a connection to an incoming call.

Execution command:

ATA

Possible responses:

CONNECT
CONNECT <text>

<text>

Description

28800

Connected with data bit rate of 28800 bits/s (HSCSD)

19200

Connected with data bit rate of 19200 bits/s (HSCSD)

14400

Connected with data bit rate of 14400 bits/s (HSCSD)

9600

Connected with data bit rate of 9600 bits/s

4800

Connected with data bit rate of 4800 bits/s

2400

Connected with data bit rate of 2400 bits/s

NO CARRIER

The mobile phone is not registered.

ERROR

If ATA is unsuccessfully executed by the phone.

Description:

Terminates a connection.

Execution command:

ATH

Description:

Initiates a phone connection, which may be data, facsimile (+FCLASS> 0), or voice
(phone number terminated by semicolon). The phone number used to establish the
connection will consist of digits and modifiers, or a stored number specification.

Execution command:

ATD

[<dial_string>][;] Dial the phone number specified in the <dial_string>

parameter.

ATD>ME

<l>[;] Dial the phone number stored in the mobile phone located by the

index<l>.

ATD>SIM

<l>[;] Dial the phone number stored in the SIM card located by the index

<l>.

ATD>LD

<l>[;] Dial the number stored in position <l> in the Last Dialled Number

list on the SIM card. The most recently dialled number is assumed to have <l>=”1”.

ATDL

Redial the last dialled phone number.

Summary of Contents for T39

































































































































































































































Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands

Ericsson T39, At Command Reference

Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands