Ericsson T39 At Command Reference Download Page 205

Page: 205 / 224

AT Commands Modem Terminated

203

5.13.3 Unconditional result codes

+CGEV

GPRS Event Reporting

+CGREG

Network Registration Reporting

Description:

This result code is enabled by using the

AT+CGEREP

command.

Possible unsolicited
result codes:

+CGEV: X, where X is shown below.

<X>

Description

REJECT
<pdp_type>,<pdp_addr>

A network request for PDP context activation occurred
when the MT was unable to report it to the TE with a

+CRING

unsolicited result code and was automatically

rejected

NW REACT
<pdp_type>,<pdp_addr>
[,<cid>]

The network has forced a network reactivation. The
<cid> that was used to reactivate the context is provided,
if known to the MT

NW DEACT
<pdp_type>,<pdp_addr>
[,<cid>]

The network has forced a network deactivation
The <cid> that was used to deactivate the context is
provided, if known to the MT

ME DEACT
<pdp_type>,<pdp_addr>
[,<cid>]

The mobile equipment has forced a network deactivation
The <cid> that was used to deactivate the context is
provided, if known to the MT

NW DETACH

The network has forced a GPRS detach
This implies that all active have been deactivated
These are not reported separately.

ME DETACH

The mobile equipment has forced a GPRS detach
This implies that all active have been deactivated
These are not reported separately.

NW CLASS <class>

The network has forced a change of phone class
The highest available class is reported

ME CLASS <class>

The mobile equipment has forced a change of phone
class
The highest available class is reported

Parameters:

See

AT+CGDCONT

Description:

This result code is enabled by using the

AT+CGREG

command.

Possible unsolicited
result codes:

+CGREG: <stat> If AT+CGREG <n>=’1’
+CGREG: <stat>[,<lac>,<ci>] If AT+CGREG <n>=’2’

Parameters:

<stat>:

<stat>

Description

Not registered
ME is currently searching for an operator to register to

Registered, home network

Summary of Contents for T39

































































































































































































































Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands

Ericsson T39, At Command Reference

Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands