Ericsson T39 At Command Reference Download Page 203

Page: 203 / 224

AT Commands Modem Terminated

201

AT+CGREG

GPRS Network Registration

Description:

Controls the presentation of the unsolicited result code

+CGREG: <stat>

when

<n>=’1’ and there is a change in the MT’s GPRS network registration status, or

+CGREG: <stat>[,<lac>,<ci>]

when <n>=’2’ and there is a change of the network

cell.

Note

: If the GPRS MT also supports circuit mode services, AT+CREG and the

+CREG result code apply to the registration status and location information for those
services.

Set command:

AT+CGREG=

[<n>]

Read command:

AT+CGREG? Displays the current <n>, <stat>[, <lac>, and <ci>] settings.

Test command:

AT+CGREG=? Shows if the command is supported.

Test command
response:

+CGREG: (list of supported <n>s)

Parameters:

<n>:

<n>

Description

Disable network registration unsolicited result code.

Default setting

Enable network registration unsolicited result code

Enable network registration and location information
unsolicited result code

<stat>:

<stat>

Description

Not registered, ME is not currently searching a new
operator to register to

Registered, home network

Not registered, but ME is currently searching a new
operator to register to

Registration denied

Unknown

Registered, roaming

<lac>:

Two byte location area code in hexadecimal format.

<ci>:

Two byte cell ID in hexadecimal format.

Summary of Contents for T39

































































































































































































































Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands

Ericsson T39, At Command Reference

Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands