Configuration Wizard
6 Click
the
Confirm Changes>
button to proceed or click
Cancel
to exit
the Wizard without saving any settings.
3.2.6 IPoA
The
IPoA
access mode is a method to transfer IP frames over ATM using
RFC 1483. The IPoA access mode requires static IP addresses and your
ISP must provide you with correct values if this mode is selected.
The HM490dp automatically activates the NAT service that will route the
traffic to/from the WAN and its internal DHCP server that will assign private
IP addresses to the PCs on the LAN/WLAN.
To configure the HM410dp for IPoA access mode, follow the steps below:
1 From
the
Start
page, click the
Configuration Wizard >
button to
display the following page:
18
1553-ZAT 759 94 Uen B – July 2005
